Y32 Car Flattener (4-column type) is suitable for scrap auto dismantling & recycling companies in reducing and flattening small passenger car bodies.
> The weight of main machine is only around 18 tons, and the split type of structure facilitates disassembling and transportation.
> The special design of stranding axes joint is adopted, the main pressure head could be biased to certain angle in working condition as per different degree of hardness at different positions of scrap car body. This makes the stress extended onto the frame constantly up straight down, and concentric with central lines of main pressure cylinders. The anti-deformation capacity of whole machine is higher.
|No.||TECH SPEC: 4-Column Car Flattener Y32-220||Remarks|
|1||Flattening Cylinder||Type||YG240/160-1500||Stroke||1500 mm||226 Ton|
|Rated Force||1130 kN||QTY.||2 PCS|
|2||Hydraulic System Pressure||25 MPa (250 kgf/cm2)|
|3||Feeding Space (L×W×H)||5500×2500×1620 mm|
|4||Pressing Stroke||1500 mm|
|5||Idle Cycle Time||70 Sec|
|6||Production Rate||30-45 cars/hr|
|7||Total Installed Power||30 kW|
|8||Items to be Handled||Passenger Car Bodies|
|9||Motor Pump Set||HY63Y+Y160L-4-15KW||Total 2 sets|
|10||Cooling of Hydraulic Oil||Air Cooling|
|11||Oil Tank Volume||1.6 m3|
|12||Operation||Push Button Ctrl|
|13||Main Machine Weight||Approx. 19 tons (Mechanical Part)|
|14||Dimensions (L×W×H)||6500×2540×4352 mm||Working State|
|15||Dimensions (L×W×H)||6500×2540×2710 mm||Transporation State|